Elite EPC-608 Manuel d'utilisation et d'entretien télécharger pdf (Page 14)

HOW TO USE THE

If you wish to program your pressure cooker to automatically cook prepared food, you can

Pre-Set the pressure cooker for up to 24-hours. (*See Tip Caution #5)

1) Prepare desired food and place into cooking pot.

2) Secure the lid onto the unit, turn it Counter-clockwise to lock it in place properly.

3) Make sure the Pressure Limiting Valve (3) is set to the “Airtight” position.

4) Plug the power cord into a 120V power outlet.

5) The LED screen will display 0000

6) Press the PRESET button to increase the timer by 1/2-hour increments. The maximum

Preset period is 24-hours. After 24-hours, the timer will start a new cycle. (The time that

displays on the LED screen shows how long the user wants the unit to wait before the

cooking process begins. EX: If you wish to program the pressure cooker to automatically

turn on in 3.5-hours, press the PRESET button until the LED screen displays 3.5 00).

7) After choosing the desired pre-set time, choose your pre-set function or cooking time.

MENU BUTTONS:

o Press one of the eight pre-programmed MENU BUTTONS. The Menu Button indicator

light will illuminate. Your pre-set timer has been programmed.

o After the pressure cooker counts down to automatically turn on, it will follow the

cooking sequence for Menu Button Operation.

o When cooking is complete, the pressure cooker will beep 3-times and automatically go

to Keep Warm. (See Notes & Tips #5)

COOKING TIME:

o Press the SET PRESSURE COOKING TIME to desired cook time. EX: If you wish to

program to cook for 60-minutes. The LED screen will display 3.5 60).

o The “Pressure Cook Time” indicator light will blink for 5-seconds and

automatically stop and set on its own if no other buttons are pushed.

o After the pressure cooker counts down to automatically turn on, it will follow the

cooking sequence for desired cook time.

o When cooking is complete, the pressure cooker will beep 3-times and automatically go

to Keep Warm. (See Notes & Tips #5)

NOTES & TIPS #5:

• It is recommended to release the pressurized steam when the “Keep Warm” LED

stops flashing as the pressure cooker will have lower pressure. This will require a

little more time. (Approximately 5-10 minutes).

• For foods with a high volume of liquid (Stews, soups, porridges, etc.) IT IS NOT

RECOMMEND TO USE QUICK RELEASE. This is to avoid liquid splatter from the

ventilation in the Pressure Limiting Valve (3).

• NATURAL RELEASE: User should wait for the temperature to drop and the Float

Valve to sink on its own prior to opening the lid.

*CAUTION: It is not recommended to use the Pre-Set Timer function to cook

foods that may spoil. Leaving raw foods inside the pressure cooker for long

periods of time prior to cooking may result in the food spoiling.

Recommended items such as rice, beans, grains or similar foods will not spoil.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 36 37

Pas de commentaire

Elite EPC-608 Manuel d'utilisation et d'entretien Page 14