Elite B/W Manuel d'utilisateur télécharger pdf

# #

INSTALLATION FOR EL2000

CAMERA MODULE MODELS EL2000BWCAMKT,

EL2000CCAMKT AND EL2000DVRCAMKT

BLACK/WHITE, COLOR

& LOW LUX COLOR

CAMERA MODULES

FOR THE EL25 & EL2000 TELEPHONE

ENTRY ACCESS CONTROL SYSTEMS

# #

Disconnect power to the unit.

2 To open, apply pressure to the right-side of the unit.

3 While maintaining pressure, turn the key clockwise.

4 Open the cover.

5 To remove the LED board, unplug the wire harness from LED

board and remove the screws (3). Do not remove the rubber

O-ring.

6 Replace black plastic lens with the clear lens. Keep rubber

O-ring in place.

7 Install the camera module. Reconnect the LED board wire

harness to the camera module.

8 Feed a coaxial cable (not provided) through the conduit hole

in the back mounting plate of the unit. Connect a BNC coaxial

connector to the back of the camera module.

9 Close and lock the unit.

10 Reconnect power to the unit.

NOTE: If the EL2000 is connected to a home entertainment system,

the home entertainment system must be switched to video input.

Clear Plastic Lens

Camera Module

Wire Harness

LED Board

O-ring

BNC Coaxial Connector

A static discharge can damage circuit boards.

1 2

# # # 1 2 3 4 5 6 7 8 9 0 * # # ? # INSTALLATION FOR EL2000CAMERA MODULE MODELS EL2000BWCAMKT, EL2000CCAMKT AND EL2000DVRCAMKTBLACK/WHITE, COLOR &

Modèles reliés EL20008WCAMKT | EL2000CCAMKT | EL2000DVRCAMKT |

Pas de commentaire